--- title: "Cantilever Rack in Lakeland, FL" url: https://orlandowarehouseracking.com/service-area/lakeland/cantilever-rack description: "Specify Lakeland cantilever rack for long materials in distribution and support areas. New material and installation: (407) 743-8726." lang: en --- Image: Cantilever Rack system inside a Florida warehouse (https://orlandowarehouseracking.com/assets/cantilever-hero-3ef0AkpP.jpg) Lakeland, Florida # Cantilever Rack Layouts for Lakeland, FL Cantilever rack in Lakeland creates dedicated storage for long materials that do not belong in ordinary pallet positions. Arms extend from uprights without front columns, allowing access to pipe, bar, lumber and tube along the loading face. The design must account for both the supported weight and the room needed to handle each length. Within a distribution building, cantilever racking may serve a focused maintenance or material-support area rather than the main pallet inventory. That distinction matters: a small long-stock zone still needs properly selected arms, upright capacity and truck access. Filling leftover floor space without checking those requirements can create a difficult loading arrangement. (407) 743-8726 ## Cantilever storage rack capacity at every level Specify arm length from supported load depth, then check the arm rating for the proposed application. Next, check the upright against the combined loading from its storage levels. A collection of individually acceptable arms can still exceed the allowed load on the upright if too much material is assigned to one column. The cantilever rack equipment page (https://orlandowarehouseracking.com/products/cantilever-rack) introduces available arrangements, but load support deserves its own review. Flexible stock needs enough contact points to control sagging, and sheet products require support suited to their orientation. Account for uneven bundles instead of assuming that every arm always receives an identical share. 1 ### One face or two Single-sided rows can work beside a boundary where only one loading face is needed. Double-sided rows provide access from two aisles, so compare total operating space rather than row footprint alone. 2 ### Actual truck movement A side-loader and a conventional forklift handle long stock differently. Establish the approach, lifting and withdrawal movements with the intended equipment before committing to aisle widths or row direction. 3 ### Storage level spacing Allow room for the bundle and the handling clearance needed to place it. Closely spaced arms do not create useful positions if the operator cannot lift and withdraw the load as intended. 4 ### Humidity and wash-down Discuss galvanized or protected finishes wherever moisture exposure is part of normal use. A nearby food distribution activity does not by itself define the requirement; the cantilever rack's actual environment must be identified. ## Coordinating cantilever racking supply and installation Build the scope from a load list, equipment details and a measured layout. Include infrequently handled lengths as well as daily picks, since occasional oversized material can govern the required access. Define receiving and staging space so newly arrived bundles do not block the row before they are put away. As a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997, we supply new rack material and organize the work around the agreed arrangement. Installation uses experienced installation crews we schedule and manage, with the assembly anchored to the floor. Crew coordination accounts for heat in non-air-conditioned facilities. For the main pallet operation, compare Lakeland pallet flow rack (https://orlandowarehouseracking.com/service-area/lakeland/pallet-flow-rack) with Lakeland drive-in rack (https://orlandowarehouseracking.com/service-area/lakeland/drive-in-rack) according to access and storage density. Cantilever racking solves a different problem, so the two equipment decisions should remain linked by workflow rather than treated as interchangeable. Lumber, plywood, and sheet goods Pipe, tube, conduit, and bar stock Steel service center inventory Furniture, doors, and windows Long or awkward loads currently sitting on the floor Call (407) 743-8726: (407) 743-8726 ## Lakeland cantilever rack within distribution layouts For 3PL and contract warehousing along County Line Road, separating long support materials from pallet traffic can clarify where each load belongs. In the Interstate Commerce Park area, packaging operations may need assigned positions for long maintenance stock alongside conventional inventory. The rack location should follow the actual receiving and retrieval route, not simply an unused wall. Newer Lakeland bulk warehouses may offer substantial vertical space, but usable rack height still depends on handling reach and clear height to the lowest overhead obstruction. Our Lakeland service area (https://orlandowarehouseracking.com/service-area/lakeland) page covers the broader location context. Inside the storage zone, load dimensions and available working clearance remain the deciding measurements. Free warehouse consultation CAD layout with position counts Installation by trusted installation partners Image: Cantilever warehouse racking holding steel tubing (https://orlandowarehouseracking.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://orlandowarehouseracking.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Operations We Rack Around Here Nearby areas we work in regularly include County Line Road, the Interstate Commerce Park area, Kathleen Road. Grocery and food distribution 3PL and contract warehousing E-commerce fulfillment Packaging ## Recent Installations Racking projects completed for warehouses across Central Florida. Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/5274032f-71fc-48b4-8f62-40fa32cf9a93/project-1.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/c0b5a835-6cdc-4a73-b955-9ebfadfebeb8/project-2.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/abb99710-74a0-452b-97b6-abfb45b924fa/project-3.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/69946ffc-5678-489c-bb3d-44b1f5b59ac0/project-4.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/b37a0910-754d-466d-8d57-b838eb3f33d3/project-5.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/4bcaeeb6-015f-40f3-bba6-553ced3667ad/project-6.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/6049c52c-1dee-42ea-8b58-41d8394a61d2/project-7.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/1bf93a7d-febe-4a82-8756-eeb4056542a9/project-8.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/7ba42732-4817-4e1e-8c68-a0c4443a556c/project-9.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/de8eca78-8d97-40b7-a71b-bff76ce322b2/project-10.jpg) View More Projects: https://orlandowarehouseracking.com/projects ## Get a Cantilever Rack Quote for Your Lakeland Warehouse Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726. ### Orlando Warehouse Racking 5366 Central Florida Pkwy Unit #260 Orlando, FL 32821 (407) 743-8726 Monday - Friday: 8:00 AM - 6:00 PM ## Cantilever Rack Questions We Hear Most ### Does a Lakeland distribution building need cantilever rack? ### Does extra building height mean more loaded levels? ### Can small quantities of pipe share a larger system? ### What changes when storage moves outdoors? ## Other Rack Types We Supply in Lakeland ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://orlandowarehouseracking.com/service-area/lakeland ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://orlandowarehouseracking.com/service-area/lakeland/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://orlandowarehouseracking.com/service-area/lakeland/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://orlandowarehouseracking.com/service-area/lakeland/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://orlandowarehouseracking.com/service-area/lakeland/carton-flow-rack ## Nearby Areas We Also Serve Our delivery and installation territory covers Central Florida, so one team can handle multiple buildings for the same company. Cantilever Rack in Orlando: https://orlandowarehouseracking.com/service-area/orlando/cantilever-rack Cantilever Rack in Kissimmee: https://orlandowarehouseracking.com/service-area/kissimmee/cantilever-rack Cantilever Rack in Sanford: https://orlandowarehouseracking.com/service-area/sanford/cantilever-rack Cantilever Rack in Daytona Beach: https://orlandowarehouseracking.com/service-area/daytona-beach/cantilever-rack Cantilever Rack in Ocala: https://orlandowarehouseracking.com/service-area/ocala/cantilever-rack Cantilever Rack in Melbourne: https://orlandowarehouseracking.com/service-area/melbourne/cantilever-rack View All Service Areas: https://orlandowarehouseracking.com/service-area ## Where We Work Located in Orlando, we serve the entire Central Florida region with industrial pallet racks and warehouse storage solutions. Orlando Warehouse Racking 5366 Central Florida Pkwy Unit #260 Orlando, FL 32821 Get Directions → (https://www.google.com/maps/place/Orlando+Warehouse+Racking) ### Orlando Warehouse Racking #### Address #### Phone (407) 743-8726 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Lakeland? Call (407) 743-8726 or request a quote and we will get a layout started. (407) 743-8726 Tap to Call: 4077438726 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://orlandowarehouseracking.com/#business", "name": "Orlando Warehouse Racking - Lakeland", "alternateName": "Orlando Warehouse Racking - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Lakeland, FL. Free warehouse design consultations and pallet rack installation services.", "url": "https://orlandowarehouseracking.com", "telephone": "(407) 743-8726", "address": { "@type": "PostalAddress", "streetAddress": "5366 Central Florida Pkwy Unit #260", "addressLocality": "Orlando", "addressRegion": "FL", "postalCode": "32821", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "28.4071853", "longitude": "-81.4487064" }, "areaServed": [ { "@type": "City", "name": "Orlando", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Kissimmee", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Sanford", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Daytona Beach", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Lakeland", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Ocala", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Melbourne", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Winter Haven", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Apopka", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Altamonte Springs", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Winter Park", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Lake Mary", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Clermont", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Ocoee", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "St. Cloud", "containedInPlace": { "@type": "State", "name": "Florida" } } ], "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://orlandowarehouseracking.com/images/logo.png", "sameAs": [ "https://facebook.com/orlandowarehouseracking", "https://linkedin.com/company/orlandowarehouseracking", "https://instagram.com/orlandowarehouseracking" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://orlandowarehouseracking.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://orlandowarehouseracking.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Lakeland", "item": "https://orlandowarehouseracking.com/service-area/lakeland" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://orlandowarehouseracking.com/service-area/lakeland/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Does a Lakeland distribution building need cantilever rack?", "acceptedAnswer": { "@type": "Answer", "text": "Only if it has long or bulky materials that benefit from arm-supported storage. Standard palletized inventory generally belongs in pallet rack; maintenance lengths and unpalletized stock may justify a separate open-front arrangement." } }, { "@type": "Question", "name": "Does extra building height mean more loaded levels?", "acceptedAnswer": { "@type": "Answer", "text": "Not automatically. Upright capacity, handling reach, load height and overhead clearance all affect the allowed arrangement. Available space above a row is not evidence that additional loaded arms can be added." } }, { "@type": "Question", "name": "Can small quantities of pipe share a larger system?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, if their assigned positions provide enough support and keep the load within the specified limits. Separate loose pieces from heavy bundles when combining them would make retrieval awkward or obscure load identification." } }, { "@type": "Question", "name": "What changes when storage moves outdoors?", "acceptedAnswer": { "@type": "Answer", "text": "The equipment specification must address outdoor use and the expected moisture exposure. Finish selection and installation sequencing also need attention, including the effect of summer afternoon thunderstorms on work in an open yard." } } ] } ] ```