--- title: "Cantilever Rack in Melbourne, FL" url: https://orlandowarehouseracking.com/service-area/melbourne/cantilever-rack description: "Melbourne cantilever rack for tube, bar, sheet and long manufacturing materials. Discuss new equipment and installation: (407) 743-8726." lang: en --- Image: Cantilever Rack system inside a Florida warehouse (https://orlandowarehouseracking.com/assets/cantilever-hero-3ef0AkpP.jpg) Melbourne, Florida # Cantilever Rack in Melbourne, FL Cantilever rack in Melbourne gives manufacturing and supply operations an open loading face for long raw materials. Arms attached to uprights carry bar, tube, pipe, lumber or suitably supported sheet without front columns blocking placement. The system should be selected around material behavior and handling access, not around a general storage-volume target. A cantilever storage rack can separate production stock by section, length or material group while preserving direct access. Its usefulness depends on support spacing, arm reach and the capacity available throughout the upright. We are a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997, with new material specified for each proposed arrangement. (407) 743-8726 ## Melbourne cantilever rack for production supply Aerospace and defense operations in the Melbourne International Airport area can assess cantilever racking for appropriate long raw stock. Start with the material's support and handling requirements rather than assuming every manufacturing input belongs on a pallet. The Melbourne service-area profile (https://orlandowarehouseracking.com/service-area/melbourne) describes the broader industrial setting for these decisions. In the Sarno Road industrial zone, light manufacturing users should map the path from incoming bundle to production withdrawal. Separate the space used to open a bundle from the aisle used to retrieve an individual length. Along the Palm Bay Road corridor, electronics distribution may combine palletized goods with long support materials that need a different storage method. Space Coast marine supply also makes exposure worth discussing early. Indoor humidity, outdoor storage and wash-down use can call for different protected or galvanized finishes. Establish the environment for each row, and account for afternoon thunderstorms when arranging exterior installation work. Free warehouse consultation CAD layout with position counts Installation by trusted installation partners Image: Cantilever warehouse racking holding steel tubing (https://orlandowarehouseracking.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://orlandowarehouseracking.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Operations We Rack Around Here Nearby areas we work in regularly include the Melbourne International Airport area, the Palm Bay Road corridor, the Sarno Road industrial zone. Aerospace and defense Electronics distribution Marine supply Light manufacturing ## Coordinate cantilever rack installation and loading Prepare a stock list identifying length ranges, bundle weights and withdrawal quantities. Include the handling truck, attachments and a dimensioned building layout. We use that information to distinguish dedicated long-stock positions from inventory better served by selective pallet rack. Cantilever rack assembly is carried out by experienced installation crews we schedule and manage, with the cantilever equipment anchored to the floor. Arrange the installation area so other work does not pass through the assembly space. Heat in non-air-conditioned buildings should be considered when coordinating crew activity. Review capacity information and the assigned material groups before loading begins. Pallet inventory can be assessed separately through pallet flow rack in Melbourne (https://orlandowarehouseracking.com/service-area/melbourne/pallet-flow-rack) for suitable rotation needs or drive-in rack in Melbourne (https://orlandowarehouseracking.com/service-area/melbourne/drive-in-rack) for compatible grouped loads. Those systems solve pallet-storage questions rather than the support requirements of loose long stock. Lumber, plywood, and sheet goods Pipe, tube, conduit, and bar stock Steel service center inventory Furniture, doors, and windows Long or awkward loads currently sitting on the floor Call (407) 743-8726: (407) 743-8726 ## Laying out the cantilever racking support arrangement Use actual dimensions and weights to establish arm length, spacing between uprights and the number of supports under each load. Our cantilever rack product page (https://orlandowarehouseracking.com/products/cantilever-rack) introduces the configuration, but material flexibility determines whether a proposed span is suitable. Thin sheet and slender sections deserve particular attention because weight alone does not describe their support needs. Arm capacity and upright capacity answer different questions. Each arm must carry its assigned demand, while the upright must accommodate the complete planned loading across levels and faces. Single-sided and double-sided configurations should be compared alongside forklift or side-loader movement, not selected solely by the number of storage positions. 1 ### Surface and support Discuss whether direct arm contact suits the stored material. Where sheet or sensitive stock needs another bearing arrangement, specify that requirement before settling the component list. 2 ### Depth on the arm Match usable arm reach to the load's supported depth. Include the placement method so operators are not expected to force a deep bundle into an unsuitable position. 3 ### Height in service Use clear height to the lowest overhead obstruction as a design input. Then allow the handling equipment enough movement to place and retrieve stock at every proposed level. 4 ### Access on both faces A double-sided row needs a workable approach from each aisle. Check whether long loads can travel through the surrounding space without crossing a conflicting production or pallet route. ## Recent Installations Racking projects completed for warehouses across Central Florida. Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/5274032f-71fc-48b4-8f62-40fa32cf9a93/project-1.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/c0b5a835-6cdc-4a73-b955-9ebfadfebeb8/project-2.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/abb99710-74a0-452b-97b6-abfb45b924fa/project-3.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/69946ffc-5678-489c-bb3d-44b1f5b59ac0/project-4.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/b37a0910-754d-466d-8d57-b838eb3f33d3/project-5.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/4bcaeeb6-015f-40f3-bba6-553ced3667ad/project-6.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/6049c52c-1dee-42ea-8b58-41d8394a61d2/project-7.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/1bf93a7d-febe-4a82-8756-eeb4056542a9/project-8.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/7ba42732-4817-4e1e-8c68-a0c4443a556c/project-9.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/de8eca78-8d97-40b7-a71b-bff76ce322b2/project-10.jpg) View More Projects: https://orlandowarehouseracking.com/projects ## Get a Cantilever Rack Quote for Your Melbourne Warehouse Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726. ### Orlando Warehouse Racking 5366 Central Florida Pkwy Unit #260 Orlando, FL 32821 (407) 743-8726 Monday - Friday: 8:00 AM - 6:00 PM ## Cantilever Rack Questions We Hear Most ### Can Melbourne manufacturers store metal bar on cantilever rack? ### Does sheet stock need a different support arrangement? ### Should a forklift or side-loader determine the layout? ### Can the same finish be used indoors and outdoors? ## Other Rack Types We Supply in Melbourne ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://orlandowarehouseracking.com/service-area/melbourne ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://orlandowarehouseracking.com/service-area/melbourne/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://orlandowarehouseracking.com/service-area/melbourne/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://orlandowarehouseracking.com/service-area/melbourne/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://orlandowarehouseracking.com/service-area/melbourne/carton-flow-rack ## Nearby Areas We Also Serve Our delivery and installation territory covers Central Florida, so one team can handle multiple buildings for the same company. Cantilever Rack in Orlando: https://orlandowarehouseracking.com/service-area/orlando/cantilever-rack Cantilever Rack in Kissimmee: https://orlandowarehouseracking.com/service-area/kissimmee/cantilever-rack Cantilever Rack in Sanford: https://orlandowarehouseracking.com/service-area/sanford/cantilever-rack Cantilever Rack in Daytona Beach: https://orlandowarehouseracking.com/service-area/daytona-beach/cantilever-rack Cantilever Rack in Lakeland: https://orlandowarehouseracking.com/service-area/lakeland/cantilever-rack Cantilever Rack in Ocala: https://orlandowarehouseracking.com/service-area/ocala/cantilever-rack View All Service Areas: https://orlandowarehouseracking.com/service-area ## Where We Work Located in Orlando, we serve the entire Central Florida region with industrial pallet racks and warehouse storage solutions. Orlando Warehouse Racking 5366 Central Florida Pkwy Unit #260 Orlando, FL 32821 Get Directions → (https://www.google.com/maps/place/Orlando+Warehouse+Racking) ### Orlando Warehouse Racking #### Address #### Phone (407) 743-8726 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Melbourne? Call (407) 743-8726 or request a quote and we will get a layout started. (407) 743-8726 Tap to Call: 4077438726 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://orlandowarehouseracking.com/#business", "name": "Orlando Warehouse Racking - Melbourne", "alternateName": "Orlando Warehouse Racking - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Melbourne, FL. Free warehouse design consultations and pallet rack installation services.", "url": "https://orlandowarehouseracking.com", "telephone": "(407) 743-8726", "address": { "@type": "PostalAddress", "streetAddress": "5366 Central Florida Pkwy Unit #260", "addressLocality": "Orlando", "addressRegion": "FL", "postalCode": "32821", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "28.4071853", "longitude": "-81.4487064" }, "areaServed": [ { "@type": "City", "name": "Orlando", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Kissimmee", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Sanford", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Daytona Beach", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Lakeland", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Ocala", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Melbourne", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Winter Haven", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Apopka", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Altamonte Springs", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Winter Park", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Lake Mary", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Clermont", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Ocoee", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "St. Cloud", "containedInPlace": { "@type": "State", "name": "Florida" } } ], "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://orlandowarehouseracking.com/images/logo.png", "sameAs": [ "https://facebook.com/orlandowarehouseracking", "https://linkedin.com/company/orlandowarehouseracking", "https://instagram.com/orlandowarehouseracking" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://orlandowarehouseracking.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://orlandowarehouseracking.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Melbourne", "item": "https://orlandowarehouseracking.com/service-area/melbourne" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://orlandowarehouseracking.com/service-area/melbourne/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can Melbourne manufacturers store metal bar on cantilever rack?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, when the support pattern and capacities are selected for the bar's dimensions and weight. Include the shortest stock and any partly depleted bundles when describing the intended storage arrangement." } }, { "@type": "Question", "name": "Does sheet stock need a different support arrangement?", "acceptedAnswer": { "@type": "Answer", "text": "It may, particularly where the sheet cannot span the proposed arm spacing without bending. Identify thickness, bundle form and handling method so the support design does not rely on weight alone." } }, { "@type": "Question", "name": "Should a forklift or side-loader determine the layout?", "acceptedAnswer": { "@type": "Answer", "text": "The handling equipment should be evaluated together with the material and available space. Compare the complete movement of the long load before assigning aisle widths or choosing single-sided versus double-sided rows." } }, { "@type": "Question", "name": "Can the same finish be used indoors and outdoors?", "acceptedAnswer": { "@type": "Answer", "text": "Not automatically; the finish must suit the exposure at each location. Discuss humidity, cleaning water and outdoor use so the selected protection matches the environment rather than merely matching nearby equipment." } } ] } ] ```