--- title: "Cantilever Rack in Ocala, FL" url: https://orlandowarehouseracking.com/service-area/ocala/cantilever-rack description: "Plan Ocala cantilever rack for building supply, manufacturing and long agricultural materials. Call (407) 743-8726 for new-system planning." lang: en --- Image: Cantilever Rack system inside a Florida warehouse (https://orlandowarehouseracking.com/assets/cantilever-hero-3ef0AkpP.jpg) Ocala, Florida # Cantilever Rack in Ocala, Florida Cantilever rack in Ocala puts long materials on open arms instead of forcing them into pallet-sized openings. With no front columns between uprights, the loading face accommodates lumber bundles, pipe, bar and tube supported at planned intervals. The result depends on matching those supports to the material rather than choosing rack dimensions in isolation. For building supply and light manufacturing, the key questions are how stock arrives, how it is withdrawn and what each position must carry. Cantilever racking can serve full bundles or organized lengths, but those uses need different access allowances. We are a division of Warehouse Equipment & Supplies Co., supplying and installing since 1997, and supply new material only. (407) 743-8726 ## Balance cantilever rack reach, weight and access The cantilever rack system overview (https://orlandowarehouseracking.com/products/cantilever-rack) is useful for understanding arms and uprights, but a workable specification needs actual stock information. Record bundle depth, length, weight and flexibility before selecting arm reach or support spacing. Sheet products may need an added support arrangement instead of being treated like rigid bar. Single-sided rows offer access from one face; double-sided rows can serve aisles on both sides. Check the capacity of each upright for the planned loading on its available faces. A conventional forklift and a side-loader move long material differently, so their aisle requirements should be compared before fixing the layout. 1 ### Bundle bearing points Locate supports so every assigned material has adequate bearing along its length. Include shorter lengths in the review rather than assuming they can share any position used for longer stock. 2 ### Arm rating Verify the rated load for the chosen arm and intended placement conditions. An impressive total bundle capacity means little if one arm receives more than its assigned share. 3 ### Upright loading Account for all occupied levels when selecting uprights. Adding another level later requires checking the revised combined load, even when individual arms remain within their ratings. 4 ### Working space Allow room for the load to enter, settle and leave the position. Access planning must include the material's full length and the attachment carrying it, not just the truck body. ## Cantilever storage rack planning for Ocala operations In the NW Ocala industrial zone, light manufacturing layouts should distinguish incoming raw stock from material ready for production. Reserve space to separate bundles without obstructing access to the arms. Our Ocala service-area page (https://orlandowarehouseracking.com/service-area/ocala) places that decision within the area's wider warehouse and supply requirements. Building-supply operations around the SR-200 corridor may need indoor positions and exterior storage considered together. An outdoor row changes finish requirements and handling conditions, even if it holds the same lumber as a covered row. Galvanized or protected finishes should be selected for the actual humidity and exposure rather than by appearance. For distribution around the Ocala 489 Commerce Park area, higher warehouse clearances do not automatically justify taller cantilever racking. Check clear height to the lowest overhead obstruction alongside the truck's ability to place the intended bundle. Agriculture and equine supply inventory should be divided by handling unit, with pallet goods evaluated separately from long materials. Free warehouse consultation CAD layout with position counts Installation by trusted installation partners Image: Cantilever warehouse racking holding steel tubing (https://orlandowarehouseracking.com/assets/cantilever-2b-G7pQApUm.jpg) Image: Cantilever rack storing lumber and wood products (https://orlandowarehouseracking.com/assets/cantilever-3b-HMeRbmPP.jpg) ### Operations We Rack Around Here Nearby areas we work in regularly include the Ocala 489 Commerce Park area, the SR-200 corridor, the NW Ocala industrial zone. Agriculture and equine supply Light manufacturing I-75 distribution Building supply ## Prepare cantilever rack for managed installation Send a material list and a layout showing columns, access doors and proposed storage boundaries. Identify which loads move frequently and which remain as reserve stock. This helps place active positions without making operators cross unrelated pallet-handling routes. We arrange assembly by experienced installation crews we schedule and manage, and the cantilever rack is anchored to the floor. Outdoor installation planning accounts for summer afternoon thunderstorms, while work in non-air-conditioned space must account for heat. Review the installed arrangement and capacity information before introducing stock. Use selective pallet rack where stable palletized loads need individual access. For other pallet patterns, pallet flow rack in Ocala (https://orlandowarehouseracking.com/service-area/ocala/pallet-flow-rack) and drive-in rack in Ocala (https://orlandowarehouseracking.com/service-area/ocala/drive-in-rack) address different rotation and grouping needs. Keep those choices distinct from the support geometry required by long goods. Lumber, plywood, and sheet goods Pipe, tube, conduit, and bar stock Steel service center inventory Furniture, doors, and windows Long or awkward loads currently sitting on the floor Call (407) 743-8726: (407) 743-8726 ## Recent Installations Racking projects completed for warehouses across Central Florida. Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/5274032f-71fc-48b4-8f62-40fa32cf9a93/project-1.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/c0b5a835-6cdc-4a73-b955-9ebfadfebeb8/project-2.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/abb99710-74a0-452b-97b6-abfb45b924fa/project-3.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/69946ffc-5678-489c-bb3d-44b1f5b59ac0/project-4.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/b37a0910-754d-466d-8d57-b838eb3f33d3/project-5.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/4bcaeeb6-015f-40f3-bba6-553ced3667ad/project-6.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/6049c52c-1dee-42ea-8b58-41d8394a61d2/project-7.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/1bf93a7d-febe-4a82-8756-eeb4056542a9/project-8.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/7ba42732-4817-4e1e-8c68-a0c4443a556c/project-9.jpg) Image: Pallet rack installation (https://orlandowarehouseracking.com/__l5e/assets-v1/de8eca78-8d97-40b7-a71b-bff76ce322b2/project-10.jpg) View More Projects: https://orlandowarehouseracking.com/projects ## Get a Cantilever Rack Quote for Your Ocala Warehouse Send the basics and we will follow up with a layout and pricing. Prefer to talk it through? Call (407) 743-8726. ### Orlando Warehouse Racking 5366 Central Florida Pkwy Unit #260 Orlando, FL 32821 (407) 743-8726 Monday - Friday: 8:00 AM - 6:00 PM ## Cantilever Rack Questions We Hear Most ### Can an Ocala building-supply yard use cantilever rack outdoors? ### Is double-sided storage always the better use of space? ### Can loose lengths share a level with bundled material? ### What information is needed before selecting arm capacity? ## Other Rack Types We Supply in Ocala ### Pallet Rack Every pallet reachable, every time. The baseline we size everything else against. View details https://orlandowarehouseracking.com/service-area/ocala ### Pushback Rack Two to six pallets deep from one aisle, without giving up much reach. View details https://orlandowarehouseracking.com/service-area/ocala/pushback-rack ### Pallet Flow Rack Load one side, pick the other, and let gravity enforce first in, first out. View details https://orlandowarehouseracking.com/service-area/ocala/pallet-flow-rack ### Drive-In Rack No aisles. The forklift enters the structure, and the floor holds more pallets per square foot than any other system. View details https://orlandowarehouseracking.com/service-area/ocala/drive-in-rack ### Carton Flow Rack Cases advance to the picker instead of the picker hunting for cases. View details https://orlandowarehouseracking.com/service-area/ocala/carton-flow-rack ## Nearby Areas We Also Serve Our delivery and installation territory covers Central Florida, so one team can handle multiple buildings for the same company. Cantilever Rack in Orlando: https://orlandowarehouseracking.com/service-area/orlando/cantilever-rack Cantilever Rack in Kissimmee: https://orlandowarehouseracking.com/service-area/kissimmee/cantilever-rack Cantilever Rack in Sanford: https://orlandowarehouseracking.com/service-area/sanford/cantilever-rack Cantilever Rack in Daytona Beach: https://orlandowarehouseracking.com/service-area/daytona-beach/cantilever-rack Cantilever Rack in Lakeland: https://orlandowarehouseracking.com/service-area/lakeland/cantilever-rack Cantilever Rack in Melbourne: https://orlandowarehouseracking.com/service-area/melbourne/cantilever-rack View All Service Areas: https://orlandowarehouseracking.com/service-area ## Where We Work Located in Orlando, we serve the entire Central Florida region with industrial pallet racks and warehouse storage solutions. Orlando Warehouse Racking 5366 Central Florida Pkwy Unit #260 Orlando, FL 32821 Get Directions → (https://www.google.com/maps/place/Orlando+Warehouse+Racking) ### Orlando Warehouse Racking #### Address #### Phone (407) 743-8726 #### Business Hours Monday - Friday: 8:00 AM - 6:00 PM Saturday: Closed Sunday: Closed ## Need Cantilever Rack in Ocala? Call (407) 743-8726 or request a quote and we will get a layout started. (407) 743-8726 Tap to Call: 4077438726 ## Structured data ```json [ { "@context": "https://schema.org", "@type": "LocalBusiness", "@id": "https://orlandowarehouseracking.com/#business", "name": "Orlando Warehouse Racking - Ocala", "alternateName": "Orlando Warehouse Racking - A Division of Warehouse Equipment & Supplies Co.", "description": "Industrial pallet racks and warehouse racking solutions in Ocala, FL. Free warehouse design consultations and pallet rack installation services.", "url": "https://orlandowarehouseracking.com", "telephone": "(407) 743-8726", "address": { "@type": "PostalAddress", "streetAddress": "5366 Central Florida Pkwy Unit #260", "addressLocality": "Orlando", "addressRegion": "FL", "postalCode": "32821", "addressCountry": "US" }, "geo": { "@type": "GeoCoordinates", "latitude": "28.4071853", "longitude": "-81.4487064" }, "areaServed": [ { "@type": "City", "name": "Orlando", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Kissimmee", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Sanford", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Daytona Beach", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Lakeland", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Ocala", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Melbourne", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Winter Haven", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Apopka", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Altamonte Springs", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Winter Park", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Lake Mary", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Clermont", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "Ocoee", "containedInPlace": { "@type": "State", "name": "Florida" } }, { "@type": "City", "name": "St. Cloud", "containedInPlace": { "@type": "State", "name": "Florida" } } ], "openingHoursSpecification": [ { "@type": "OpeningHoursSpecification", "dayOfWeek": [ "Monday", "Tuesday", "Wednesday", "Thursday", "Friday" ], "opens": "08:00", "closes": "18:00" } ], "priceRange": "$$", "paymentAccepted": "Cash, Credit Card, Check", "image": "https://orlandowarehouseracking.com/images/logo.png", "sameAs": [ "https://facebook.com/orlandowarehouseracking", "https://linkedin.com/company/orlandowarehouseracking", "https://instagram.com/orlandowarehouseracking" ], "hasOfferCatalog": { "@type": "OfferCatalog", "name": "Pallet Rack Systems", "itemListElement": [ { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Selective Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Push Back Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Drive-In Pallet Rack Systems" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Warehouse Design Consultation" } }, { "@type": "Offer", "itemOffered": { "@type": "Service", "name": "Pallet Rack Installation" } } ] } }, { "@context": "https://schema.org", "@type": "BreadcrumbList", "itemListElement": [ { "@type": "ListItem", "position": 1, "name": "Home", "item": "https://orlandowarehouseracking.com/" }, { "@type": "ListItem", "position": 2, "name": "Service Area", "item": "https://orlandowarehouseracking.com/service-area" }, { "@type": "ListItem", "position": 3, "name": "Ocala", "item": "https://orlandowarehouseracking.com/service-area/ocala" }, { "@type": "ListItem", "position": 4, "name": "Cantilever Rack", "item": "https://orlandowarehouseracking.com/service-area/ocala/cantilever-rack" } ] }, { "@context": "https://schema.org", "@type": "FAQPage", "mainEntity": [ { "@type": "Question", "name": "Can an Ocala building-supply yard use cantilever rack outdoors?", "acceptedAnswer": { "@type": "Answer", "text": "Yes, an outdoor arrangement can be specified for appropriate long materials. Select the finish for exposure and establish the handling area, support pattern and complete loading arrangement before choosing components." } }, { "@type": "Question", "name": "Is double-sided storage always the better use of space?", "acceptedAnswer": { "@type": "Answer", "text": "No; it only helps when both faces have usable access and suitable handling room. A single-sided row may fit the building and material flow better than a central row requiring two working aisles." } }, { "@type": "Question", "name": "Can loose lengths share a level with bundled material?", "acceptedAnswer": { "@type": "Answer", "text": "They can only share a position when the support and retrieval arrangement suits both forms of stock. Separate positions are often worth considering where withdrawing loose lengths would disturb or obstruct a bundle." } }, { "@type": "Question", "name": "What information is needed before selecting arm capacity?", "acceptedAnswer": { "@type": "Answer", "text": "Provide bundle weight, dimensions and the proposed number of supporting arms. Also describe uneven loads or mixed materials so the capacity decision reflects how weight reaches each support." } } ] } ] ```